Shipwrecks of the Outer Bank illustrates more than 1,550 shipwrecks of the Atlantic Coast from Cape Henry, Virginia to Cape Fear, North Carolina. Each wreck site is symbolized to define the class, type and name of vessel accompanied by the date of sinking. Icons also indicate whether a ship was lost due to conflict or natural causes. Locations of lifesaving stations and lighthouses, along with navigational beacons are also marked. Bathymetric and coastal features are clearly labeled. Captions and drawings highlight unique historical events. The map is encapsulated in heavy-duty 1.6 mil laminate which makes the paper much more durable and resistant to the swelling and shrinking caused by changes in humidity. Laminated maps can be framed without the need for glass, so the fames can be much lighter and less expensive. 28″ x 36″
Finishing Option Descriptions
Most wall maps are offered in a variety of finishing options. If you need a map that’s ready to hang on the wall, we can frame or martin mount your map to save you time and money. Here are the details, contact us with questions.
Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.
Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.
Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.
First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.
First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.
Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.