Fort Wayne & Allen Co, IN Wall Map

The Ft. Wayne & Allen County, Indiana Wall Map by Kappa Map Group measures 58″ x 66″ (4’10” W x 5’6″H) in complete street detail at a scale of 1″=2333″. Printed in color with a markable and washable-laminated surface. Streets are indexed in a separate book. Covers all of Allen County with the following boundaries: North: to the DeKalb County line; South to the Allen / Wells County line, including Zanesville; East: to the Indiana / Ohio State line; West to the Whitney County line, including Churubusco. Map details: all streets and highways, water features, shopping centers, recreational parks, township/section/range lines, township names and boundaries, government buildings, fire/police stations, educational facilities, golf/country clubs, city limits & annexations, ZIP codes/boundaries, airports, hospitals, railroads, post offices, cemeteries, libraries and points of interest. Comes standard with hanging rails mounted top and bottom. Railed wall maps can be turned into pull down maps on spring rollers for an additional $30. 58″ x 66″ 

Paper

Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.

laminated

Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.

mounted

Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.

Rails

First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.

Martin Mount

First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.

Framed

Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.

Spring Roller

The map is laminated then installed on a spring roller and backboard. Multiple maps can be placed on a spring roller. Please click here to read more details.