This is the best United States 3-Digit Zip Code Wall Map available. This map is perfect for business planning at its 75” × 54″ size. It can be viewed at a distance for easy planning and its size is large enough to work on collaboratively with your team.
The map includes the three-digit zip code prefixes for all areas across the US. Insets are included for dense areas like New York, Washington D.C., San Francisco, and Los Angeles. Insets for Alaska, Hawaii, and a simplified national sip code prefix inset is also included.
We recommend either the laminated finishing where you can use wet erase markers to draw on the map than easily wipe clean for another use, or the Martin Mount of framed finishing option, where we mount the map on a piece of foam core so you can place pins on your areas of interest.
We have a custom cartography department available if you’d like to take this base map and customize it your suit your needs.
Size: 75” × 54″
Finishing Option Descriptions
Most wall maps are offered in a variety of finishing options. If you need a map that’s ready to hang on the wall, we can frame or martin mount your map to save you time and money. Here are the details, contact us with questions.
Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.
Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.
Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.
First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.
First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.
Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.