Washington, DC Wall Map by Globe Turner

Quantity discounts on all combinations of Wall Maps!
Buy any 2 get $5 off  ||  Buy any 5 get $20 off ||  Buy any 10 get $50 off

This detailed reference map combines two maps in one – a regional map of the District of Columbia and surrounding Maryland and Virginia suburbs plus a street-level map of downtown Washington. The regional map shows the area’s cities and towns, highways and roads, and a variety of points of interest. Encompassing the historic area between Georgetown and Capitol Hill – including The Mall, The White House, the Capitol Building, and a part of Arlington National Cemetery in Virginia – the downtown map shows highways, streets, parks, landmarks, and other points of interest. Developed by Globe Turner. 28.3″ x 36″

Most wall maps are offered in a variety of finishing options. If you need a map that’s ready to hang on the wall, we can frame or martin mount your map to save you time and money. Here are the details, contact us with questions.

Paper

Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.

laminated

Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.

mounted

Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.

Rails

First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.

Martin Mount

First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.

Framed

Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.

Spring Roller

The map is laminated then installed on a spring roller and backboard. Multiple maps can be placed on a spring roller. Please click here to read more details.