This map print highlights the National Trail route of the Pennine Bridleway, showing the start and finish points on an attractive relief base and created in the official National Trail colors.
Map Size: 16.75″ x 23.5″
This product is printed on demand using our large format inkjet printers. Print-on-demand maps are always in stock and you can order as many as you need all at once to have them ship together!
We offer free returns within 30 days for this product*. Contact us within 30 days of receiving your product to receive a return authorization number, which you can write on the box and ship back to us. We will issue your return within three days of receiving the product back.
We do not refund the initial shipping charges and you’re responsible for shipping charges to get the product back to us unless we made a mistake in the order.
*Finishes such as Martin Mount & Framed are also not returnable as they went through production on a by-order basis by our team. If you have any questions on if your order qualifies for a return, please CONTACT US.
Most wall maps are offered in a variety of finishing options. If you need a map that’s ready to hang on the wall, we can frame or martin mount your map to save you time and money. Here are the details, contact us with questions.
Paper Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.
laminated Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.
mounted Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.
Rails First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.
Martin Mount First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.
Framed Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.