The signature Classic style United States map uses a bright, easy to read color palette featuring blue oceans and stunning shaded relief that has been featured on National Geographic wall maps for over 75 years. All 50 States are featured including insets for Alaska and the Hawaiian Islands. An inset demonstrating the relative size of Alaska is shown as well. All major cities, transportation routes, State boundaries, National Parks, inland waterways, and mountain ranges are clearly displayed and labeled. It is truly an iconic map that never goes out of style. Mural Maps are printed on a tear-resistant, coated paper to achieve a combination of exceptional strength, color protection, and long life. Mural Maps can be hung using heavy duty (clay based) wallpaper paste. The map is coated to resist dirt and dust and may be cleaned with a slightly dampened cloth. 106″ x 73.75″
Finishing Option Descriptions
Most wall maps are offered in a variety of finishing options. If you need a map that’s ready to hang on the wall, we can frame or martin mount your map to save you time and money. Here are the details, contact us with questions.
Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.
Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.
Paper maps are printed then laminated with 1.7mil-thick satin lamination onto 1/4″-thick foamcore. You can use map pins, stickers, or wet-erase markers with our mounted maps.
First, we laminate the map then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.
First, we laminate the map onto foamcore then we mount wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail. Use map pins, stickers, or wet-erase markers on your maps.
Maps are laminated onto foam core then secured into the frame. The engineered molding is made from recycled wood in either a black or walnut-finish. Most map moldings are 2″ x 3/4″ but maps 24″ x 36″ and under use a 1.25″ wide molding. You can use map pins, stickers, or wet-erase markers on all our framed maps.